\ \ \ Fluoroplast-4M

Fluoroplast-4M

Fluoroplast-4 Modified

TU 2213-054-00203521-99

(-CF2-CF2-)n

Analogs: Teflon NXT70, Algoflon F3140x, Dyneon TFM 1700, 1705, 1600

Fluoroplast-4М (F-4М) is also a product of TFE polymerization with the introduction of a small amount of modifier. F-4М has the same properties as F-4, but at the same time it has a higher strength, lower porosity and high resistance to bending (alternate loads).

Fluoroplast-4М is applied in the same areas where F-4 is used. Our plants produce the following grades of F-4М (as per TU 2213-054-00203521-99):

Property
Grade
F-4M
F-4МL
F-4МТ
F-4МО
F-4МN
Appearance
Easily-lumping white powder with no visible inclusions
Moisture content, %, max
0,02
0,02
0,02
0,02
0,02
Density, g/cm3, max
2,18
2,19
2,19
2,20
2,22
Tensile strength of unhardened specimen, MPa (kgf/cm2), min
28 (287)
24 (245)
24
(245)
15,7 (160)
10
(102)
Elongation at break unhardened specimen, %, min
310
400
400
350
150
Dielectric strength, kV/mm, min
60
30
Not standar
dized
Not standar
dized
Not standar
dized